Measurement Computing’s (Norton, Mass) two new data acquisition products featuring a new O/S-independent protocol that allows DAQ devices to be programmed with simple text-based messages are now available from Adept Scientific (Letchworth, Herts).
[UKPRwire, Thu Oct 08 2009] A new 7000 series product line, which includes the USB-7202 and USB-7204 boards, combines small form-factor, bus-powered USB hardware and a light and agile software framework that can be ported to multiple operating systems. The software framework, a core technology to the series, is called Message-Based DAQ (MBD).
MBD is a well-defined protocol that permits the programming of DAQ devices using simple text-based messages. The MBD protocol greatly simplifies driver and application development because all DAQ operations are programmed through a common command interface which is composed of a consistent, extensible firmware interface and an open-source, cross-platform API.
The firmware parses text-based messages transmitted through a device driver and converts these messages into DAQ-specific commands that control the device. This concise and well-documented interface allows driver development for multiple operating systems and also supports O/S-independent embedded systems that need to communicate only over a USB root port.
The USB-7202 and USB-7204 boards are multifunction measurement and control devices intended specifically for the MBD protocol. Intended primarily for OEM applications, both are shipped as open stackable PC/104-sized boards without enclosures.
The USB-7202 features:
• Eight analogue input channels
• 16-bit resolution
• 100 kS/s max total throughput
• Simultaneous sampling (1 A/D converter per input)
• One 32-bit event counter
• External digital trigger input
• External pacer
• Eight digital I/O lines
• Detachable screw terminals.
The USB-7204 features:
• Eight single-ended, or four differential, analogue inputs
• Two 12-bit analogue outputs
• 12-bit (differential), 11-bit (single-ended)
• Up to 50 kS/s sample rate
• 16 digital I/O lines
• Detachable screw terminals.
Both the USB-7202 and USB-7204 offer two USB connection options: high retention B-type and OEM header.
Each product ships with a 2-meter long USB cable, four nylon standoffs with screws and a CD containing a Windows® installer file (msi), the MC7000 help file and an archive file containing installation files for a Linux operating system.
“We developed the new architecture specifically for OEMs,” explained Jim Stevens, Measurement Computing’s vice president of R&D, “The Message-Based DAQ architecture is ideal for developers who value a small driver footprint, an easy-to-learn API and the ability to port their application to virtually any operating system. The MBD software API is open source, so OEM developers can strip it down, enhance it and otherwise modify it depending on their specific needs. The USB-7202 and 7204 are just the first two in a series of MBD products under development.”
About Measurement Computing
Measurement Computing is the market leader in the design, manufacture, and distribution of low-priced data acquisition hardware, and test and measurement software solutions for both programmers and non-programmers.
The Measurement Computing product range is supplied and supported in the UK by Adept Scientific.
With offices in the UK, USA, Germany and throughout the Nordic region, Adept Scientific is one of the world's leading suppliers of software and hardware products for research, scientific, engineering and technical applications on desktop computers. Full details and contact information for all Adept Scientific international offices are available at www.adeptscience.com; or telephone +44 (0)1462 480055.
